AutoDefects
Español

Mercedes-Benz GLE / M-Class 2007: fiabilidad

15 % menos fallos mecánicos que su clase

2186 inspecciones MOT de Mercedes-Benz GLE / M-Class matriculados por primera vez en 2007: el 23,3 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 27,5 %.

Tasa de fallo mecánico
23,3%
Mediana de la clase, misma edad y kilometraje
27,5%
No pasó la MOT (cualquier motivo)
33,4%
inspecciones MOT
2186
Llamadas a revisión
5

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km742,9%12,9%
50-100k km559,1%13,8%
100-150k km24418,0%21,8%
150k+ km188024,4%28,8%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas8,8%
Frenos13,6%
Motor, escape y emisiones4,4%
Dirección1,1%
Carrocería, bastidor y corrosión4,7%
Cinturones y airbags2,3%
Luces y electricidad (desgaste)16,5%
Neumáticos (desgaste)5,3%
Escobillas y parabrisas (desgaste)3,3%
Otros y matrículas (desgaste)0,6%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • NHTSA (US)Grave2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Texto completo

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML, GL, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    24V298000 ↗
  • EU Safety Gate2004–2015

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping…

    Texto completo

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping distance. Moreover, due to severe corrosion, a particularly strong or severe braking manoeuvre may cause mechanical damage to the brake booster, preventing the vehicle from decelerating through the service brake and thus increasing the risk of an accident.

    A12/00830/22 ↗
  • NHTSA (US)Grave2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Texto completo

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML-Class, GL-Class, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    22V315000 ↗
  • EU Safety GateGrave2004–2016

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In…

    Texto completo

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

    A12/01236/20 ↗
  • EU Safety GateGrave2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Texto completo

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗