Mercedes-Benz CLS 2019: fiabilidad
1088 inspecciones MOT de Mercedes-Benz CLS matriculados por primera vez en 2019: el 8,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 4,1 %.
- Tasa de fallo mecánico
- 8,0%
- Mediana de la clase, misma edad y kilometraje
- 4,1%
- No pasó la MOT (cualquier motivo)
- 16,1%
- inspecciones MOT
- 1088
- Llamadas a revisión
- 7
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 315 | 4,1% | 3,2% |
| 50-100k km | 617 | 9,4% | 4,3% |
| 100-150k km | 134 | 9,0% | 5,3% |
| 150k+ km | 22 | 18,2% | 5,4% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…
A12/01979/24 ↗Texto completo
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…
A12/01237/22 ↗Texto completo
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Texto completo
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…
A12/00045/22 ↗Texto completo
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…
A12/01336/20 ↗Texto completo
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.
Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of…
A12/00618/20 ↗
Mostrar 1 llamadas más
The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and…
A12/1130/19 ↗Texto completo
The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.