Ford S-MAX / Galaxy 2013: fiabilidad
10.161 inspecciones MOT de Ford S-MAX / Galaxy matriculados por primera vez en 2013: el 25,7 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 25,5 %.
- Tasa de fallo mecánico
- 25,7%
- Mediana de la clase, misma edad y kilometraje
- 25,5%
- No pasó la MOT (cualquier motivo)
- 39,3%
- inspecciones MOT
- 10.161
- Llamadas a revisión
- 4
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 42 | 2,4% | 9,5% |
| 50-100k km | 751 | 14,0% | 14,4% |
| 100-150k km | 3216 | 23,7% | 23,1% |
| 150k+ km | 6152 | 28,3% | 28,2% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Localised overheating of the engine cylinder head can occur due to the engine not containing sufficient coolant. This may cause the cylinder head to crack, causing a pressurised oil leak that may result in a fire in the…
A12/01371/21 ↗Texto completo
Localised overheating of the engine cylinder head can occur due to the engine not containing sufficient coolant. This may cause the cylinder head to crack, causing a pressurised oil leak that may result in a fire in the engine compartment.
The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and…
A12/01240/20 ↗Texto completo
The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, it may underinflate or the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The clutch pressure plate may break while the vehicle is in motion. This may lead to a malfunction of the transmission and to increased risk of the engine catching fire.
A12/1883/19 ↗null The injector O-ring/s may have been damaged during assembly which could cause a fuel leak into the cylinder head injector recess. The build up of fuel in the recess could run down the back of the engine and contact…
A12/1309/13 ↗Texto completo
null The injector O-ring/s may have been damaged during assembly which could cause a fuel leak into the cylinder head injector recess. The build up of fuel in the recess could run down the back of the engine and contact the exhaust/hot surfaces causing a risk of smoke or fire.