AutoDefects
Deutsch

Toyota RAV4 2003: Zuverlässigkeit

23% weniger technische Mängel als die Klasse

4.498 MOT-Prüfungen von Toyota RAV4 mit Erstzulassung 2003: 28,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 37,0%.

Technische Mängelquote
28,4%
Klassenmedian, gleiches Alter und gleiche Laufleistung
37,0%
Durchgefallen (jeder Grund)
39,3%
MOT-Prüfungen
4.498
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1711,8%—%
50-100k km25314,2%15,7%
100-150k km89521,3%28,2%
150k+ km3.33331,5%41,0%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder14,7%
Bremsen9,3%
Motor, Abgasanlage und Emissionen10,9%
Lenkung0,9%
Karosserie, Rahmen und Rost7,2%
Gurte und Airbags1,4%
Licht und Elektrik (Verschleiß)19,3%
Reifen (Verschleiß)3,8%
Wischer und Scheibe (Verschleiß)6,6%
Sonstiges und Kennzeichen (Verschleiß)0,4%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2001–2005

    The seat-belt retractors may not function properly, where the force limiter may allow the seat belt to extend more than intended. This in turn may increase the amount of forward motion of the occupant, increasing the…

    Volltext

    The seat-belt retractors may not function properly, where the force limiter may allow the seat belt to extend more than intended. This in turn may increase the amount of forward motion of the occupant, increasing the risk of injury, in the event of an accident.

    A12/01663/22 ↗
  • EU Safety GateErnst2003–2005

    null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash,…

    Volltext

    null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash, resulting in metal fragments injuring the vehicle occupants.

    A12/0661/15 ↗