AutoDefects
Deutsch

Toyota Hilux 2014: Zuverlässigkeit

Im Klassendurchschnitt

4.828 MOT-Prüfungen von Toyota Hilux mit Erstzulassung 2014: 25,9% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 25,5%.

Technische Mängelquote
25,9%
Klassenmedian, gleiches Alter und gleiche Laufleistung
25,5%
Durchgefallen (jeder Grund)
36,5%
MOT-Prüfungen
4.828
Rückrufe
3

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km11421,9%14,9%
50-100k km73218,0%17,3%
100-150k km1.53923,0%23,6%
150k+ km2.44330,2%29,6%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder13,2%
Bremsen14,7%
Motor, Abgasanlage und Emissionen2,9%
Lenkung1,1%
Karosserie, Rahmen und Rost6,1%
Gurte und Airbags1,9%
Licht und Elektrik (Verschleiß)17,3%
Reifen (Verschleiß)3,3%
Wischer und Scheibe (Verschleiß)6,1%
Sonstiges und Kennzeichen (Verschleiß)0,7%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2014–2019

    The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from…

    Volltext

    The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from deploying properly, increasing the risk of injury in the event of a crash.

    A12/1601/19 ↗
  • EU Safety GateErnst2011–2014

    null A fault in the gas generator of the driver airbag could cause uncontrolled inflation of the airbag when activated, leading to an increased risk of injury.

    A12/1042/17 ↗
  • EU Safety GateErnst2014

    null The steering intermediate shaft pinch bolt may not have been properly tightened during vehicle assembly. The bolt could consequently loosen, and if the vehicle is continuously operated in this condition, the bolt…

    Volltext

    null The steering intermediate shaft pinch bolt may not have been properly tightened during vehicle assembly. The bolt could consequently loosen, and if the vehicle is continuously operated in this condition, the bolt could eventually come off and cause a loss of steering.

    A12/1483/14 ↗