Toyota C-HR 2016: Zuverlässigkeit
488 MOT-Prüfungen von Toyota C-HR mit Erstzulassung 2016: 4,7% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 12,9%.
- Technische Mängelquote
- 4,7%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 12,9%
- Durchgefallen (jeder Grund)
- 15,0%
- MOT-Prüfungen
- 488
- Rückrufe
- 3
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 52 | 1,9% | 5,4% |
| 50-100k km | 271 | 4,4% | 11,7% |
| 100-150k km | 138 | 5,1% | 15,8% |
| 150k+ km | 27 | 11,1% | 24,8% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from…
A12/1601/19 ↗Volltext
The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from deploying properly, increasing the risk of injury in the event of a crash.
The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on…
A12/1327/18 ↗Volltext
The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on the wire harness or the cover, vibration during vehicle use may cause the insulation on the wires to wear over time and expose the core wire, causing an electrical short circuit to occur between the damaged wires and generate heat. If sufficient heat is generated, there is an increased risk of fire.
null Certain portions of the wall of the fuel tank may be too thin. A crack could consequently develop in the wall of the fuel tank causing a leak which could lead to a fire.
A12/1079/17 ↗