Škoda Superb 2022: Zuverlässigkeit
469 MOT-Prüfungen von Škoda Superb mit Erstzulassung 2022: 3,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 3,2%.
- Technische Mängelquote
- 3,4%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 3,2%
- Durchgefallen (jeder Grund)
- 9,0%
- MOT-Prüfungen
- 469
- Rückrufe
- 4
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 120 | 0,8% | 0,4% |
| 50-100k km | 183 | 3,8% | 3,6% |
| 100-150k km | 104 | 5,8% | 5,8% |
| 150k+ km | 62 | 3,2% | 3,2% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering capability, increasing the risk of accidents.
SR/03168/26 ↗If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas generator housing may come loose and cause serious or fatal injuries to vehicle…
SR/02896/25 ↗Volltext
If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas generator housing may come loose and cause serious or fatal injuries to vehicle occupants.
A defective fuse can produce a voltage flashover into the vehicle interior. This might cause fire and lead to an accident.
A12/00636/22 ↗Engine design covers installed on affected vehicles could come loose from the attachment depending on use (e.g. very sporty driving style or poor road surface conditions) and the running time. If the design cover is not…
A12/00566/22 ↗Volltext
Engine design covers installed on affected vehicles could come loose from the attachment depending on use (e.g. very sporty driving style or poor road surface conditions) and the running time. If the design cover is not fastened, there is a possibility that it will come into contact with the hot area of the exhaust gas turbocharger, increasing the risk of burns or fire.