AutoDefects
Deutsch

Renault Clio 2013: Zuverlässigkeit

33% mehr technische Mängel als die Klasse

20.191 MOT-Prüfungen von Renault Clio mit Erstzulassung 2013: 34,5% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 25,8%.

Technische Mängelquote
34,5%
Klassenmedian, gleiches Alter und gleiche Laufleistung
25,8%
Durchgefallen (jeder Grund)
44,2%
MOT-Prüfungen
20.191
Rückrufe
5

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km68812,1%8,3%
50-100k km5.66826,8%19,3%
100-150k km8.87536,9%27,6%
150k+ km4.96041,9%32,6%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder19,8%
Bremsen14,6%
Motor, Abgasanlage und Emissionen3,1%
Lenkung3,2%
Karosserie, Rahmen und Rost10,2%
Gurte und Airbags0,5%
Licht und Elektrik (Verschleiß)14,8%
Reifen (Verschleiß)8,9%
Wischer und Scheibe (Verschleiß)6,4%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2012–2017

    null The central pivot pin of the back structure of the rear bench-seat does not have sufficient mechanical strength. In the event of a violent front impact to the vehicle, heavy items of luggage in the boot could…

    Volltext

    null The central pivot pin of the back structure of the rear bench-seat does not have sufficient mechanical strength. In the event of a violent front impact to the vehicle, heavy items of luggage in the boot could consequently be projected into the cabin causing injuries to the occupants.

    A12/1518/17 ↗
  • EU Safety Gate2001–2015

    null The front wheel arch may be incorrectly installed. As a result, the brake hose may come into contact with the front wheel arch, causing wear of the brake hose by fretting. If the brake hose breaks and the brake…

    Volltext

    null The front wheel arch may be incorrectly installed. As a result, the brake hose may come into contact with the front wheel arch, causing wear of the brake hose by fretting. If the brake hose breaks and the brake fluid leaks out, the performance of braking could be compromised.

    A12/0606/16 ↗
  • EU Safety Gate2001–2015

    null Due to insufficient tightening of the wheel bolts, a wheel may be lost while driving.

    A12/0087/16 ↗
  • EU Safety Gate2013, 2014

    null Improper positioning of the rear part of the front wheel arch liner can cause it to come into contact with the flexible brake hose, which may reduce braking efficiency.

    A12/0949/15 ↗
  • EU Safety GateErnst2001–2014

    null There is a risk of aggression of the front flexible brake hose by the underwing plastic protectors (Clio IV) and/or a risk of escape of the hydraulic pistons from the rear drum brake cylinder (Clio IV Berlina).…

    Volltext

    null There is a risk of aggression of the front flexible brake hose by the underwing plastic protectors (Clio IV) and/or a risk of escape of the hydraulic pistons from the rear drum brake cylinder (Clio IV Berlina). This could lead to a brake fluid leak and consequent loss of braking efficiency.

    A12/1270/14 ↗