AutoDefects
Deutsch

Peugeot 3008 2017: Zuverlässigkeit

57% mehr technische Mängel als die Klasse

16.498 MOT-Prüfungen von Peugeot 3008 mit Erstzulassung 2017: 15,5% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 9,9%.

Technische Mängelquote
15,5%
Klassenmedian, gleiches Alter und gleiche Laufleistung
9,9%
Durchgefallen (jeder Grund)
24,1%
MOT-Prüfungen
16.498
Rückrufe
15

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1.7327,7%3,9%
50-100k km8.91314,2%8,6%
100-150k km4.84719,4%13,4%
150k+ km1.00622,2%14,4%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder6,5%
Bremsen4,5%
Motor, Abgasanlage und Emissionen1,2%
Lenkung0,7%
Karosserie, Rahmen und Rost5,5%
Gurte und Airbags0,9%
Licht und Elektrik (Verschleiß)4,8%
Reifen (Verschleiß)5,7%
Wischer und Scheibe (Verschleiß)4,2%
Sonstiges und Kennzeichen (Verschleiß)0,1%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2008–2026

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…

    Volltext

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.

    SR/01379/26 ↗
  • EU Safety GateErnst2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Volltext

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Volltext

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
9 weitere Rückrufe anzeigen
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Volltext

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2016–2020

    The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.

    A12/00646/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01505/20 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗
  • EU Safety Gate2017, 2018

    The bolts attaching the tow bar may not be correctly tightened. Parts of the tow bar could detach and fall on the road.

    A12/0646/18 ↗
  • EU Safety GateErnst2016, 2017

    There is contact between a fuel hose and the aerodynamic screen located under the fuel tank. Over time, this could cause a fuel leak. Fuel leakage onto the road could cause another vehicle to lose control.

    A12/0043/18 ↗
  • EU Safety Gate2016, 2017

    null The starter motor supply terminal may come into contact with an engine component. This could lead to damage to the supply terminal and to a short circuit. As a result, it may be impossible to start the vehicle.

    A12/1344/17 ↗
  • EU Safety GateErnst2017

    null The fixing studs for the curtain airbags are not welded properly. This could cause a curtain airbag malfunction in the event of a lateral impact.

    A12/0986/17 ↗
  • EU Safety Gate2016, 2017

    null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot…

    Volltext

    null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot be excluded that it could hurt a passer-by or the person opening the door from the outside.

    A12/0281/17 ↗