AutoDefects
Deutsch

Nissan NV200 / e-NV200 2019: Zuverlässigkeit

Im Klassendurchschnitt

2.343 MOT-Prüfungen von Nissan NV200 / e-NV200 mit Erstzulassung 2019: 9,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 9,8%.

Technische Mängelquote
9,8%
Klassenmedian, gleiches Alter und gleiche Laufleistung
9,8%
Durchgefallen (jeder Grund)
27,5%
MOT-Prüfungen
2.343
Rückrufe
3

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1.0004,8%5,9%
50-100k km83610,5%11,2%
100-150k km34417,7%13,7%
150k+ km16320,3%17,9%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder3,9%
Bremsen5,1%
Motor, Abgasanlage und Emissionen0,4%
Lenkung0,1%
Karosserie, Rahmen und Rost1,1%
Gurte und Airbags0,8%
Licht und Elektrik (Verschleiß)13,8%
Reifen (Verschleiß)8,3%
Wischer und Scheibe (Verschleiß)5,9%
Sonstiges und Kennzeichen (Verschleiß)0,1%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • NHTSA (US)2013–2021

    Nissan North America, Inc. (Nissan) is recalling certain 2013-2021 NV200 Van, 2014-2017, 2019 NV200 Taxi, and 2015-2018 Chevrolet City Express vehicles. The Fuel Tank Temperature (FTT) sensor harness may have been…

    Volltext

    Nissan North America, Inc. (Nissan) is recalling certain 2013-2021 NV200 Van, 2014-2017, 2019 NV200 Taxi, and 2015-2018 Chevrolet City Express vehicles. The Fuel Tank Temperature (FTT) sensor harness may have been incorrectly routed, damaging wires and causing a short circuit in the fuel pump fuse.

    25V676000 ↗
  • EU Safety GateErnst2019

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the…

    Volltext

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the airbag, causing burn damage to the bag material. As a result, the airbag may tear during inflation reducing its protective function.

    A12/00391/21 ↗
  • EU Safety Gate2019

    The welding of the actuator plate can be defective, which can cause the park lock to not engage when the customer shifts into the "Park" position.This can result in unexpected vehicle movement, increasing the risk of an…

    Volltext

    The welding of the actuator plate can be defective, which can cause the park lock to not engage when the customer shifts into the "Park" position.This can result in unexpected vehicle movement, increasing the risk of an accident.

    A12/01429/20 ↗