AutoDefects
Deutsch

Honda Civic 2014: Zuverlässigkeit

54% weniger technische Mängel als die Klasse

14.404 MOT-Prüfungen von Honda Civic mit Erstzulassung 2014: 8,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 19,3%.

Technische Mängelquote
8,8%
Klassenmedian, gleiches Alter und gleiche Laufleistung
19,3%
Durchgefallen (jeder Grund)
23,0%
MOT-Prüfungen
14.404
Rückrufe
7

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km7163,1%7,9%
50-100k km3.9965,5%15,3%
100-150k km5.1328,6%19,5%
150k+ km4.56013,0%24,3%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder2,2%
Bremsen5,0%
Motor, Abgasanlage und Emissionen0,8%
Lenkung0,8%
Karosserie, Rahmen und Rost0,4%
Gurte und Airbags0,9%
Licht und Elektrik (Verschleiß)11,0%
Reifen (Verschleiß)6,3%
Wischer und Scheibe (Verschleiß)4,4%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2014–2021

    On wheels without pressed-in hubs made of alloy steel, the tightening torque of the wheel nuts is too low and could cause the nuts to come loose while the vehicle is in motion, resulting in a risk of wheel loss,…

    Volltext

    On wheels without pressed-in hubs made of alloy steel, the tightening torque of the wheel nuts is too low and could cause the nuts to come loose while the vehicle is in motion, resulting in a risk of wheel loss, accident and injuries.

    SR/00471/26 ↗
  • EU Safety Gate2005–2014

    The drive shafts installed in the vehicles concerned were coated with a lubricant which accelerates the wearing of the protective layer covering them, making them more susceptible to damage caused by road debris.…

    Volltext

    The drive shafts installed in the vehicles concerned were coated with a lubricant which accelerates the wearing of the protective layer covering them, making them more susceptible to damage caused by road debris. Furthermore, grit containing de-icing agents used to maintain the roads could accumulate in damaged parts of the drive shafts, increasing corrosion and the risk of breaking at high torque.Both situations increase the risk of accident/injury for passengers and other road users.

    A12/00656/22 ↗
  • EU Safety GateErnst2010–2015

    A defect in the gas generator of the front-seat passenger airbag leads to uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause the occupants of the vehicle to be injured.

    A12/0063/19 ↗
  • EU Safety GateErnst2004–2015

    null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle…

    Volltext

    null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.

    A12/0474/16 ↗
  • NHTSA (US)2014, 2015

    Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Civic vehicles manufactured January 16, 2014, to November 6, 2014 and 2015 Fit vehicles manufactured March 12, 2014, to May 12, 2015. The…

    Volltext

    Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Civic vehicles manufactured January 16, 2014, to November 6, 2014 and 2015 Fit vehicles manufactured March 12, 2014, to May 12, 2015. The software settings that control the transmission operation may result in damage to the transmission drive pulley shaft.

    15V574000 ↗
  • EU Safety GateErnst2000–2029

    null The driver's airbag inflator may produce excessive internal pressure if deployed. The increased pressure may cause the inflator to rupture propelling metal fragments causing injury to the vehicle occupants.

    A12/0725/15 ↗
1 weitere Rückrufe anzeigen
  • NHTSA (US)2014

    American Honda Motor Co., Inc. (Honda) is recalling certain model year 2014 Honda Civic LX vehicles manufactured November 26, 2013, through January 21, 2014. In the affected vehicles, during mounting of the tires, the…

    Volltext

    American Honda Motor Co., Inc. (Honda) is recalling certain model year 2014 Honda Civic LX vehicles manufactured November 26, 2013, through January 21, 2014. In the affected vehicles, during mounting of the tires, the tire bead may have gotten pinched between the assembly equipment and the steel wheel rims, resulting in damage to the tire.

    14V109000 ↗