AutoDefects
Deutsch

Citroën / DS DS3 2014: Zuverlässigkeit

51% mehr technische Mängel als die Klasse

17.979 MOT-Prüfungen von Citroën / DS DS3 mit Erstzulassung 2014: 34,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 22,9%.

Technische Mängelquote
34,6%
Klassenmedian, gleiches Alter und gleiche Laufleistung
22,9%
Durchgefallen (jeder Grund)
46,3%
MOT-Prüfungen
17.979
Rückrufe
11

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km68616,2%8,7%
50-100k km6.08429,3%17,6%
100-150k km7.55037,1%24,5%
150k+ km3.65941,5%30,8%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder15,5%
Bremsen7,4%
Motor, Abgasanlage und Emissionen4,8%
Lenkung6,5%
Karosserie, Rahmen und Rost16,9%
Gurte und Airbags0,8%
Licht und Elektrik (Verschleiß)18,5%
Reifen (Verschleiß)9,1%
Wischer und Scheibe (Verschleiß)6,3%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2008–2019

    The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.

    A12/03128/23 ↗
  • EU Safety GateErnst2009–2019

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00004/24 ↗
  • EU Safety GateErnst2009–2017

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00006/24 ↗
  • EU Safety GateErnst2009–2017

    The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/00884/24 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
5 weitere Rückrufe anzeigen
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Volltext

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateErnst2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Volltext

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01504/20 ↗
  • EU Safety GateErnst2009–2017

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…

    Volltext

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.

    A12/00148/21 ↗
  • EU Safety Gate2014

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could…

    Volltext

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could lead to a loss in driving stability and affect the steering.

    A12/0653/15 ↗