AutoDefects
Deutsch

Citroën Dispatch / SpaceTourer 2013: Zuverlässigkeit

13% mehr technische Mängel als die Klasse

2.511 MOT-Prüfungen von Citroën Dispatch / SpaceTourer mit Erstzulassung 2013: 34,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 30,4%.

Technische Mängelquote
34,4%
Klassenmedian, gleiches Alter und gleiche Laufleistung
30,4%
Durchgefallen (jeder Grund)
50,1%
MOT-Prüfungen
2.511
Rückrufe
3

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km2020,0%12,0%
50-100k km25031,2%21,2%
100-150k km57234,3%27,2%
150k+ km1.66935,1%33,0%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder12,8%
Bremsen9,6%
Motor, Abgasanlage und Emissionen5,4%
Lenkung2,4%
Karosserie, Rahmen und Rost20,2%
Gurte und Airbags1,4%
Licht und Elektrik (Verschleiß)30,7%
Reifen (Verschleiß)6,7%
Wischer und Scheibe (Verschleiß)10,4%
Sonstiges und Kennzeichen (Verschleiß)0,6%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2012–2014

    null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…

    Volltext

    null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.

    A12/1484/15 ↗
  • EU Safety GateErnst2010–2014

    null Fuel leakage at the junction between the fuel return pipe and the injectors on the engine, due to gradual wear of the return pipe, can lead to the risk of fire.

    A12/2130/14 ↗
  • EU Safety Gate2013

    null Front brake discs with the incorrect thickness may have been fitted. If this has happened, breakage of the brake discs cannot be ruled out.

    A12/0386/14 ↗