AutoDefects
Deutsch

BMW X6 2014: Zuverlässigkeit

29% weniger technische Mängel als die Klasse

1.331 MOT-Prüfungen von BMW X6 mit Erstzulassung 2014: 9,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 12,6%.

Technische Mängelquote
9,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
12,6%
Durchgefallen (jeder Grund)
19,5%
MOT-Prüfungen
1.331
Rückrufe
10

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km137,7%4,0%
50-100k km1845,4%8,9%
100-150k km5559,0%13,0%
150k+ km57910,2%13,6%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder4,9%
Bremsen2,6%
Motor, Abgasanlage und Emissionen1,2%
Lenkung0,2%
Karosserie, Rahmen und Rost1,1%
Gurte und Airbags0,5%
Licht und Elektrik (Verschleiß)4,9%
Reifen (Verschleiß)7,1%
Wischer und Scheibe (Verschleiß)3,4%
Sonstiges und Kennzeichen (Verschleiß)0,7%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2003–2018

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02573/24 ↗
  • EU Safety GateErnst2005–2014

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing…

    Volltext

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.

    A12/01929/23 ↗
  • EU Safety GateErnst2006–2014

    The driver or passenger airbag inflator may malfunction. In the event of an airbag activation this can lead to the release of fragments from the generator housing, increasing the risk of injury.

    A12/01382/23 ↗
  • EU Safety GateErnst2012–2015

    The airbag propellant may deteriorate over time, and If deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00783/23 ↗
  • EU Safety Gate2013–2019

    The four ISOFIX child-seat attachment brackets on the rear seats may not have the necessary structural durability. As a result, one or more of the brackets could break under increased fatigue loading during operation.…

    Volltext

    The four ISOFIX child-seat attachment brackets on the rear seats may not have the necessary structural durability. As a result, one or more of the brackets could break under increased fatigue loading during operation. This may increase the risk of injury in the event of an accident.

    A12/00042/20 ↗
  • NHTSA (US)Ernst2008–2014

    These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

    20V017000 ↗
4 weitere Rückrufe anzeigen
  • NHTSA (US)Ernst2008–2014

    These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment…

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d vehicles and 2010-2011 X6 ActiveHybrid vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

    19V017000 ↗
  • NHTSA (US)2011–2014

    Water and debris may enter the front driveshaft's universal joint, causing excessive wear and possibly resulting in the joint's failure.

    Volltext

    BMW of North America, LLC, (BMW) is recalling certain 2011-2013 X5 xDrive35i, X5 xDrive50i, X5 M and X5 xDrive35d vehicles, 2011-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles, and 2011 x6 ActiveHybrid Vehicles. Water and debris may enter the front driveshaft's universal joint, causing excessive wear and possibly resulting in the joint's failure.

    17V138000 ↗
  • EU Safety GateErnst2011–2016

    null The control unit of the electronic power steering may have been incorrectly manufactured. This may cause a fire even when the vehicle is parked. Furthermore, steering assistance might fail while driving.

    A12/1587/16 ↗
  • EU Safety GateErnst2014

    null The housing of the driver's airbag inflator may have been incorrectly welded. In the event of an accident involving airbag deployment, the inflator may rupture. This might lead to metal fragments passing through…

    Volltext

    null The housing of the driver's airbag inflator may have been incorrectly welded. In the event of an accident involving airbag deployment, the inflator may rupture. This might lead to metal fragments passing through the airbag and causing injury to the vehicle occupants.

    A12/1330/16 ↗