AutoDefects
Deutsch

BMW X3 2012: Zuverlässigkeit

24% weniger technische Mängel als die Klasse

6.765 MOT-Prüfungen von BMW X3 mit Erstzulassung 2012: 13,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 17,1%.

Technische Mängelquote
13,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
17,1%
Durchgefallen (jeder Grund)
29,8%
MOT-Prüfungen
6.765
Rückrufe
13

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km454,4%4,0%
50-100k km6066,6%9,6%
100-150k km1.87710,4%14,3%
150k+ km4.23715,2%19,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder7,6%
Bremsen4,3%
Motor, Abgasanlage und Emissionen0,6%
Lenkung1,1%
Karosserie, Rahmen und Rost0,7%
Gurte und Airbags0,8%
Licht und Elektrik (Verschleiß)17,0%
Reifen (Verschleiß)6,6%
Wischer und Scheibe (Verschleiß)3,2%
Sonstiges und Kennzeichen (Verschleiß)0,3%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2006–2015

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal…

    Volltext

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries.

    SR/00596/26 ↗
  • EU Safety GateErnst2003–2018

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02573/24 ↗
  • EU Safety GateErnst2012–2014

    A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries.

    A12/01981/24 ↗
  • EU Safety GateErnst2003–2015

    The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.

    A12/03030/23 ↗
  • EU Safety GateErnst2005–2014

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing…

    Volltext

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.

    A12/01929/23 ↗
  • EU Safety GateErnst2012–2017

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing…

    Volltext

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.

    A12/01930/23 ↗
7 weitere Rückrufe anzeigen
  • EU Safety GateErnst2012–2015

    The airbag propellant may deteriorate over time, and If deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00783/23 ↗
  • EU Safety GateErnst2011, 2012

    null The housing of the driver’s front airbag inflator may have been incorrectly welded. In the event of a crash with airbag activation, the inflator may consequently rupture. Metal fragments created as a result could…

    Volltext

    null The housing of the driver’s front airbag inflator may have been incorrectly welded. In the event of a crash with airbag activation, the inflator may consequently rupture. Metal fragments created as a result could pass through the airbag, causing fatal injuries to the vehicle occupants.

    A12/1202/17 ↗
  • NHTSA (US)Ernst2012, 2013

    BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that…

    Volltext

    BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.

    17V495000 ↗
  • EU Safety GateErnst2011–2016

    null The control unit of the electronic power steering may have been incorrectly manufactured. This may cause a fire even when the vehicle is parked. Furthermore, steering assistance might fail while driving.

    A12/1587/16 ↗
  • EU Safety Gate2010–2016

    null The four ISOFIX child-seat attachment brackets on the rear seats are insufficiently strong and could break when under stress from dynamic turning movements. This could increase the risk of injury in the event of an…

    Volltext

    null The four ISOFIX child-seat attachment brackets on the rear seats are insufficiently strong and could break when under stress from dynamic turning movements. This could increase the risk of injury in the event of an accident.The product does not comply with the UNECE Regulation No. 14.

    A12/0799/16 ↗
  • NHTSA (US)2011–2017

    The affected vehicles have lower anchor bars for securing child restraint seats that may become damaged when using the European-ISOFIX-type, rigid-style connector, child restraint system.

    Volltext

    BMW of North America, LLC (BMW) is recalling certain model year 2011-2017, X3 sDrive28i, X3 xDrive28i and X3 xDrive35i, vehicles manufactured July 2, 2010 to April 14, 2016, 2015-2017 X3 xDrive28d vehicles manufactured March 10, 2014 to March 31, 2016, and 2015-2017 x4 xDrive28i, X4 xDrive35i and X4 xDriveM40i vehicles manufactured March3, 2014 to April 15, 2016. The affected vehicles have lower anchor bars for securing child restraint seats that may become damaged when using the European-ISOFIX-type, rigid-style connector, child restraint system.

    16V333000 ↗
  • EU Safety GateErnst2011–2013

    null In the event of an accident with airbag deployment, the passenger front airbag may not deploy correctly. This can lead to an increased risk of injury for the passenger. Additionally, parts of the instrument panel…

    Volltext

    null In the event of an accident with airbag deployment, the passenger front airbag may not deploy correctly. This can lead to an increased risk of injury for the passenger. Additionally, parts of the instrument panel could be thrown into the passenger compartment.

    A12/1815/13 ↗