AutoDefects
Deutsch

BMW X1 2012: Zuverlässigkeit

9% mehr technische Mängel als die Klasse

5.378 MOT-Prüfungen von BMW X1 mit Erstzulassung 2012: 17,9% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 16,4%.

Technische Mängelquote
17,9%
Klassenmedian, gleiches Alter und gleiche Laufleistung
16,4%
Durchgefallen (jeder Grund)
30,0%
MOT-Prüfungen
5.378
Rückrufe
7

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km504,0%4,0%
50-100k km5949,6%9,6%
100-150k km1.92416,6%14,3%
150k+ km2.81020,8%19,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder9,9%
Bremsen7,2%
Motor, Abgasanlage und Emissionen2,0%
Lenkung0,8%
Karosserie, Rahmen und Rost2,6%
Gurte und Airbags0,4%
Licht und Elektrik (Verschleiß)8,7%
Reifen (Verschleiß)9,0%
Wischer und Scheibe (Verschleiß)4,6%
Sonstiges und Kennzeichen (Verschleiß)0,4%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • NHTSA (US)Ernst2012–2015

    An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 2012-2016 3 Series, 5 Series, Z4, 2012-2015 X1, 2013-2017 X3, 2015-2016 4 Series Gran Coupe, 2 Series Convertible, 2014-2016 328xi Gran Turismo, 2 Series Coupe, 4 Series Convertible, 3 Series Coupe, 3 Series Sportswagon, 2015-2018 X4, and 2016-2018 X5 xDrive40e vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.

    26V733000 ↗
  • EU Safety GateErnst2006–2015

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal…

    Volltext

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries.

    SR/00596/26 ↗
  • EU Safety GateErnst2003–2018

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02573/24 ↗
  • NHTSA (US)Ernst2012–2015

    BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive,…

    Volltext

    BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.

    24V608000 ↗
  • EU Safety GateErnst2003–2015

    The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.

    A12/03030/23 ↗
  • EU Safety GateErnst2005–2014

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing…

    Volltext

    The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.

    A12/01929/23 ↗
1 weitere Rückrufe anzeigen
  • EU Safety GateErnst2012–2015

    The airbag propellant may deteriorate over time, and If deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00783/23 ↗