AutoDefects
Deutsch

BMW 3 Series 1999: Zuverlässigkeit

Im Klassendurchschnitt

2.601 MOT-Prüfungen von BMW 3 Series mit Erstzulassung 1999: 25,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 25,9%.

Technische Mängelquote
25,8%
Klassenmedian, gleiches Alter und gleiche Laufleistung
25,9%
Durchgefallen (jeder Grund)
33,9%
MOT-Prüfungen
2.601
Rückrufe
10

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km4012,5%—%
50-100k km26314,8%14,8%
100-150k km58324,9%24,9%
150k+ km1.71528,2%28,0%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder13,9%
Bremsen11,0%
Motor, Abgasanlage und Emissionen6,3%
Lenkung1,8%
Karosserie, Rahmen und Rost4,3%
Gurte und Airbags5,9%
Licht und Elektrik (Verschleiß)14,3%
Reifen (Verschleiß)4,8%
Wischer und Scheibe (Verschleiß)5,7%
Sonstiges und Kennzeichen (Verschleiß)0,5%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst1998–2006

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal…

    Volltext

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries.

    SR/00583/26 ↗
  • EU Safety GateErnst1999–2005

    The propellant in the passenger airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing…

    Volltext

    The propellant in the passenger airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.

    A12/01882/23 ↗
  • NHTSA (US)Ernst1999–2001

    These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may…

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.

    21V401000 ↗
  • EU Safety GateErnst1997–2000

    The vehicles affected may have been fitted with Takata non-azide driver inflator (NADI) gas generators in which inadequate sealing on the gas generator could allow the ingress of moisture and thus result in the…

    Volltext

    The vehicles affected may have been fitted with Takata non-azide driver inflator (NADI) gas generators in which inadequate sealing on the gas generator could allow the ingress of moisture and thus result in the degradation of the propellant. If the airbag deploys, this could cause the gas generator to underinflate or to burst. In the case of under inflation the protective effect is not given. In case of overpressure deployment metal parts can enter the vehicle interior, this could cause serious or fatal injuries to occupants of the vehicle.

    A12/00852/20 ↗
  • EU Safety GateErnst1999–2003

    The gas generator on the driver side airbag could burst in the event of airbag activation if it had been exposed to high air humidity, high temperatures and considerable temperature fluctuations over several years. This…

    Volltext

    The gas generator on the driver side airbag could burst in the event of airbag activation if it had been exposed to high air humidity, high temperatures and considerable temperature fluctuations over several years. This could result in metal parts being discharged, increasing the risk of injury of the vehicle occupants. No information

    A12/00017/19 ↗
  • NHTSA (US)Ernst1999

    These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to…

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 1999 323i and 328i vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata at one specific inflator production facility. These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

    19V851000 ↗
4 weitere Rückrufe anzeigen
  • NHTSA (US)Ernst1999, 2000

    These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to…

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 1999-2000 323i and 328i and 2000 323Ci and 328Ci vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

    19V852000 ↗
  • NHTSA (US)Ernst1999–2001

    These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag…

    Volltext

    BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.

    19V853000 ↗
  • EU Safety GateErnst1999–2003

    null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the…

    Volltext

    null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the ejection of metal parts, which could cause injury or death to the driver and the passengers.

    A12/0266/17 ↗
  • EU Safety GateErnst1999–2006

    null The front passenger-side inflators could create excessive internal pressure during airbag deployment after long-term exposure to high, absolute humidity environments. In a worst-case scenario, the inflator may…

    Volltext

    null The front passenger-side inflators could create excessive internal pressure during airbag deployment after long-term exposure to high, absolute humidity environments. In a worst-case scenario, the inflator may rupture, possibly causing injury. Even if the inflator does not rupture, due to the specific design of the front passenger-side airbag module with its integrated inflator, any excessive internal pressure of the inflator could potentially result in an increased risk of airbag-induced injuries in a deployment event.

    A12/1207/14 ↗