Alfa Romeo Stelvio 2021: Zuverlässigkeit
712 MOT-Prüfungen von Alfa Romeo Stelvio mit Erstzulassung 2021: 3,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 2,0%.
- Technische Mängelquote
- 3,0%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 2,0%
- Durchgefallen (jeder Grund)
- 8,7%
- MOT-Prüfungen
- 712
- Rückrufe
- 8
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 527 | 2,7% | 1,7% |
| 50-100k km | 183 | 3,8% | 2,8% |
| 100-150k km | 2 | 0,0% | 4,3% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The printed circuit board and software for the rearview camera may contain defects that cause the rearview camera image not to display properly. As such, these vehicles fail to comply with the requirements of Federal…
25V667000 ↗Volltext
Chrysler (FCA US, LLC) is recalling certain 2020-2025 Alfa Romeo Giulia and Alfa Romeo Stelvio vehicles. The printed circuit board and software for the rearview camera may contain defects that cause the rearview camera image not to display properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
A seat belt buckle switch sensor may be improperly connected, preventing the front seat air bag from deploying as intended.
24V510000 ↗Volltext
Chrysler (FCA US, LLC) is recalling certain 2017-2024 Alfa Romeo Giulia, 2018-2025 Alfa Romeo Stelvio, 2019-2023 Fiat 500X, Jeep Renegade, and 2024 Fiat 500E vehicles. A seat belt buckle switch sensor may be improperly connected, preventing the front seat air bag from deploying as intended.
The tire pressure and size information on the tire placard and manufacturer labels are incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire…
24V512000 ↗Volltext
Chrysler (FCA US, LLC) is recalling certain 2017-2024 Alfa Romeo Giulia and 2021-2024 Alfa Romeo Stelvio vehicles. The tire pressure and size information on the tire placard and manufacturer labels are incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Due to a manufacturing defect, the integrated fuel pressure and temperature sensor in the vehicles concerned may impact the fuel supply line. This may result in fuel leakage, increasing the risk of fire in the engine…
A12/01833/21 ↗Volltext
Due to a manufacturing defect, the integrated fuel pressure and temperature sensor in the vehicles concerned may impact the fuel supply line. This may result in fuel leakage, increasing the risk of fire in the engine compartment.
The fuel line sensor housing may crack and leak fuel.
21V878000 ↗Volltext
Chrysler (FCA US, LLC) is recalling certain 2020-2021 Alfa Romeo Stelvio, and Alfa Romeo Giulia vehicles. The fuel line sensor housing may crack and leak fuel.
The IBS (integrated brake system) module may be defective. This may cause a failure of the ABS (anti-lock braking system), increasing the risk of an accident.
A12/01312/21 ↗
2 weitere Rückrufe anzeigen
Hard braking may cause the Anti-Lock Brake System (ABS) Hydraulic Control Unit (HCU) rotor shaft to separate, a reduction of braking assist, and a loss of ABS.
21V309000 ↗Volltext
Chrysler (FCA US, LLC) is recalling certain 2019-2021 Alfa Romeo Stelvio and 2020-2021 Alfa Romeo Giulia vehicles. Hard braking may cause the Anti-Lock Brake System (ABS) Hydraulic Control Unit (HCU) rotor shaft to separate, a reduction of braking assist, and a loss of ABS.
An improperly crimped clamp may allow the side curtain air bag cushion and inflator to separate, causing an incomplete deployment or preventing the deployment of the air bag.
21V221000 ↗Volltext
Chrysler (FCA US, LLC) is recalling certain 2021 Alfa Romeo Stelvio vehicles. An improperly crimped clamp may allow the side curtain air bag cushion and inflator to separate, causing an incomplete deployment or preventing the deployment of the air bag.